User's Guide

FM Frequency

The following Frequency Setting adjustments are possible only when

using the Xpress XM receiver in your vehicle.

NOTE: The Xpress XM receiver has an internal FM Modulator, which

allows you to play the audio through any standard vehicle FM receiver.

In certain urban areas of the country where strong FM stations may

overpower the Xpress XM receiver FM transmitted signal, an FM direct

adapter may be needed to achieve a clean audio signal (Part Number

XMFM-1) in your vehicle.

FM ON or OFF Feature

This feature allows the user to turn the FM Modulator ON or OFF when

the Xpress XM

receiver is used in the Vehicle cradle only. It is

recommended that you turn the FM Modulator OFF if you are using the

low level audio outputs in your particular application (optional cable

needed SAT-RCA) (see Figure 7). Upon entering the “FM Frequency”

mode the FM Modulator will be OFF by default. To turn the FM

Modulator ON, turn the Rotary/Select knob CW/CCW or use the UP and

DOWN buttons on the Remote Control to the highlight the desired fre-

quency (88.1, 88.3, 88.5,.......107.9).

Menu Options