User's Guide

Figure 14. Direct Tuning Screen

Direct Tune

Turn the Rotary/Select Knob CW or CCW to highlight choice Direct Tune

“On” or Direct Tune “Off”. When the desired setting is highlighted, press

the Rotary/Select Knob or the (XM) Select Button on the remote control to

confirm (see Figure 14). The direct tune function when enabled (ON),

allows the user to manually tune to a channel using the Rotary/Select

Knob or the remote control UP and DOWN buttons. The unit will

automatically switch to the selected channel without pressing the

Rotary/Select Knob or the (XM) Select Button on the remote control. When

direct tune is set to off, this allows the user to manually tune to a channel

using the Rotary/Select Knob or the remote control UP and DOWN

buttons. The Rotary/Select Knob or the (XM) Select Button on the remote

control must be pressed to confirm the selection.

Menu Options