User's Guide

31
Figure 18. Tune Select Screen
Tune Select
This feature allows the user to store current program information (Artist
and Song title) for future comparison against the incoming XM signal. The
Xpress XM receiver can hold up to 20 entries, after which any new
information saved will replace the oldest entry in memory.
To store a song or artist, press and hold the Rotary/Select Knob or the (XM)
Select Button on the remote control until the unit emits a confirmation tone.
When the exact Artist or Song is detected on another XM channel, the user
will be notified via a confirmation tone. An alert will also appear on the
screen for approximately 8 seconds identifying that a match was found.
Pressing the Rotary/Select Knob or the (XM) Select Button on the remote
control while this screen is active forces the unit to jump to the channel
currently playing before desired Artist or Song.
Tune Select Erase All
To delete all entries from the Tune Select list go to menu options then use
the Rotary/Select Knob or the UP and DOWN buttons on the remote
control to choose “YES” or “NO” (see Figure 19). Press the Rotary/Select
Knob or the (XM) Select Button on the remote control to confirm the
selection.
Menu Options