User's Guide

46
Figure 36. Auto-On Screen
Auto-On
The Xpress XM receiver is configured to shut down when the vehicle is
shut OFF or power is disconnected. By default, when the power to the
unit is reapplied the user must press the Power button to turn the unit
back ON. This feature allows the user to program the Xpress XM
receiver to automatically turn ON when the power to the unit is
reapplied (much like a vehicle radio).
When in the Auto-On menu use the Rotary/Select Knob or the Remote
control UP and DOWN buttons to highlight either “On” or “Off” (see Figure
36). When the desired setting is highlighted, press the Rotary/Select Knob,
or the remote’s (XM) select button to enter your selection. Acceptance is
confirmed by an audio beep and confirmation screen.
Menu Options