User's Guide

Figure 42. Memory Selection Screens

Preset / Direct

The pre./dir. button determines whether the numbered buttons 0 through

9 will operate as a keypad for entering channel numbers directly, or as

presets (A, B, C) used to select channels. The unit informs the operator

by displaying the selected mode (DIRECT, PRESET A, PRESET B,

PRESET C) on the top line of the display.

To recall the saved information, press and hold the memory (mem.)

button for three (3) seconds and the MEMORY RECALL screen will be

displayed (see Figure 42). If there is more than one (1) entry in memory,

use the Rotary/Select Knob or the remote control UP and DOWN

buttons to scroll through all stored entries.

To exit this mode, either press the Menu button twice or Jump button

once. This mode will also time-out after 10 seconds and return to the

active screen.

Menu Options