Installation guide

128-7219A
7 of 12
continuously. If you experience a loss of signal
or audio, reposition the antenna inside the
home or outside as necessary.
3. Installing the XR9 In the Cradle
Install the XR9 as follows:
a. Carefully line up the rear spine grooves
with the cradle guide spines; slide the latch
-7-
tab lever to the unlock ( ) position, and lower
the XR9 into the cradle.
b. After making sure the connectors are properly
lined up, gently press down on the XR9 to
mate the connectors together.
c. Slide the latch tab lever to the lock (
) position;
the tab will enter the XR9 latching tab recess
to prevent vertical movement. The XR9 should
now be nestled securely in the cradle.
ANT RF
CONNECTOR
CRADLE
REAR
VIEW
REAR VIEW
REAR SPINE
GROOVES
LATCHING
TAB RECESS
LATCH TAB
LOCK/UNLOCK
LEVER
ANTAUDIODC IN
16-PIN
SYSTEM
CONNECTOR
CRADLE
FRONT VIEW
CRADLE
TOP VIEW
LATCH TAB
LOCK/UNLOCK
LEVER
LATCHING
TAB
CRADLE GUIDE
SPINES
CONNECTOR
GUIDE PIN