IRLinc Transmitter INSTEON® to IR Converter Model : 2411T
IRLinc Transmitter Owner’s Manual TABLE OF CONTENTS ABOUT IRLINC TRANSMITTER ................................................................................................................. 3 Key IRLinc Transmitter Features ............................................................................................................... 3 What is Included with IRLinc Transmitter .................................................................................................. 3 WHAT IS INSTEON? ..............
IRLinc Transmitter Owner’s Manual ABOUT IRLINC TRANSMITTER With IRLinc Transmitter, you can convert INSTEON commands from any INSTEON Controller to IR commands for controlling audio/visual (A/V) devices. You can set up macros to send several IR commands from a single press of a button. IRLinc is compatible with almost every IR command, allowing you to control your TV, stereo, and much more from your INSTEON devices.
IRLinc Transmitter Owner’s Manual WHAT IS INSTEON? Since its inception in 2005, INSTEON has become a best-selling home-control networking technology, offering more reliability and flexibility than any other home management system on the market. INSTEON systems are simple, reliable, and affordable. Simple, because each device takes mere minutes to install. Reliable, because every INSTEON device works as a network repeater, ensuring your commands will not be lost.
IRLinc Transmitter Owner’s Manual INSTALLATION Preparing to Install IRLinc Transmitter CAUTION Read and understand these instructions before installing and retain them for future reference. IRLinc is intended for installation in accordance with the National Electric Code and local regulations in the United States or the Canadian Electrical Code and local regulations in Canada. Use indoors only. IRLinc is not designed nor approved for use on power lines other than 120V 60Hz, single phase.
IRLinc Transmitter Owner’s Manual Installing IRLinc Transmitter 1) Plug the IR emitter plug into the IRLinc emitter jack 2) Plug IRLinc into a convenient, unswitched wall outlet near your IR equipment HINT: You will need access to the bottom of IRLinc during Linking so you may want to temporarily use an extension cord until setup is complete.
IRLinc Transmitter Owner’s Manual CONTROLLING IRLINC TRANSMITTER FROM AN INSTEON CONTROLLER Linking an INSTEON Controller to IRLinc Transmitter To control your IR devices from an INSTEON Controller, follow these steps to Link IRLinc and the Controller together. Refer to your Controller’s Owner’s Manual for detailed instructions on how to properly install and Link it to IRLinc Transmitter. The following will work for the most common INSTEON devices: 1) Set the Controller to Linking Mode.
IRLinc Transmitter Owner’s Manual ADVANCED FEATURES Restoring Power to IRLinc Transmitter IRLinc stores all of its settings, such as Links to other INSTEON devices, with non-volatile memory. Because settings are saved in this non-volatile memory, they will not be lost in the event of a power failure. Resetting IRLinc Transmitter to its Factory Default Settings The factory reset procedure will clear IRLinc of all INSTEON Links and any programmed X10 addresses.
IRLinc Transmitter Owner’s Manual ABOUT INSTEON Using Dual-Band INSTEON Devices to Upgrade Your Network What are phases? The majority of single-family homes in North America have two phases (or “legs”) of 110 Volts coming into their electricity panels. From the panel, they are distributed throughout the home, providing power to outlets and wall switches. These phases come together in some parts of the home to provide 220 Volts of power to large appliances, such as an electric oven or pool pump.
IRLinc Transmitter Owner’s Manual TROUBLESHOOTING Troubleshooting During Setup Figure 1 Page 10 of 15
IRLinc Transmitter Owner’s Manual Troubleshooting After Setup If you have tried these solutions, reviewed this Owner’s Manual, and still cannot resolve an issue you are having with IRLinc, please call: INSTEON Gold Support Line 800-762-7845 Page 11 of 15
IRLinc Transmitter Owner’s Manual IRLINC TRANSMITTER IR COMPATIBILITY Compatible Devices The following devices have been reported to contain at least one IR code compatible with IRLinc: Device Type Brand Model # Air Filter IQ Air Health Pro Apple TV Apple TV N/A Candles FlameFree F327ML5003 CD Pioneer SA-PM17 Digital TV Converter Insignia NS-DXA1-APT DVR TiVo N/A Gaming Xbox V1 w/ IR HDTV Card Hauppague 1600 Juke Box Sony DVP-CX995V Matrix Switcher Channel Vision Pro P1420
IRLinc Transmitter Owner’s Manual Incompatible Devices Delphi XM Radios Parity bits have been found to cause commands after the first to not work. Sony VisionTouch Check for either: • “VisionTouch” printed on the faceplate • Model number ending with “G” • Came with “Air-Egg” remote Almost no learning remote can work with a VisionTouch receiver.
IRLinc Transmitter Owner’s Manual RF Satellites For anyone attempting to consolidate all of their remotes into a single unit, satellite systems can pose a potentially major problem: RF through-the-wall controls. As satellite receivers are the only mainstream A/V devices manufactured today using this technology, IR universal remotes do not include RF support. Satellite receivers come with either an RF-only remote or an RF and IR remote.
IRLinc Transmitter Owner’s Manual Limited Warranty Seller warrants to the original consumer purchaser of this product that, for a period of two years from the date of purchase, this product will be free from defects in material and workmanship and will perform in substantial conformity to the description of the product in this Owner’s Manual. This warranty shall not apply to defects or errors caused by misuse or neglect.
