Manual

OWNER’S MANUAL
AV 5.1k /
11
SPK IN
(1.2 - 20V)
AV 5.1k
L
- + - +
R
CH A
L
- + - +
R
CH B
L
- + - +
R
CH C
IN B - PREOUT IN A - 3CH
IN B
ART
(IN A)
IN C
LL
R
ONOFF
PREOUTONONOFF
R
(IN A+B)
IN C
1. IN A-3 CH: Channel A left and right analog inputs. Set the IN B switch to IN A, through this input you can drive
channel B left and right inputs. Set the IN C switch to IN A+B, you can drive channel C through A and B inputs if
active.
2. IN B - PREOUT: Analog inputs for channel B left and right. Depending on the configuration chosen these RCAs
perform the PREOUT function by setting the IN B switch to PREOUT.
3. IN C: Mono channel C analog inputs.
4. SPK IN CH A: Channel A high-level left and right analog inputs.
5. SPK IN CH B: Channel B high-level left and right analog inputs.
6. SPK IN CH C: Channel C high-level left and right analog inputs.
7. ART (ON-OFF): Select ON to turn on the amplifier through the speaker power cable, if the source does not
feature a 12V DC REMOTE OUT. Select OFF if REMOTE OUT from the source is available.
8. IN B PREOUT - ON: Set the switch to ON to drive channel B inputs with the signal coming from IN B inputs. Set
the switch to PREOUT to drive channel B inputs with the signals coming from A inputs. In this configuration, IN B
RCAs are transformed into the channel A PREOUT.
9. IN C ON - OFF: Set the switch to ON to drive channel C inputs with the signal coming from IN C inputs. Set the
switch to OFF to drive channel C inputs with the signals coming from A+B inputs.
7. FRONT PANEL
139654
2 8 7
7