Quick Start Guide

Digital Most Interface
MOSTOPTICAL OUT
POWER
USB
PHONE
REM
IN
REM
OUT
12 V
KEY
SW
INPUTS
MUTE IN
FL FR RRRL
AD Link
AC Link
FUSE HOLDER
Not provided.
Suggested fuse
3 A delayed
RED + BATT
BLACK GND WHITE VALET
BLUE REM OUT
Ground
Ground
Battery
Max 20 cm / 7.5 in.
+12 Volt
INGRESSO OTTICO MOST
MOST OPTICAL INPUT
bit DMI INPUT CONNECTOR
Light
OUT
Light
IN
Fiber
IN
Fiber
OUT
USCITA RIENTRO LUCE
Le frecce puntano
la direzione della luce
LIGHT IN & OUT
Arrows point direction of the light
REM IN
REM IN
BY-PASS
BUTTON
12 V
BY-PASS MODE OFF
BY-PASS MODE ON
REM IN
REM IN
AP 8.9 bit / AP 5.9 bit / AP 4.9 bit
TH THESIS
bit Ten D
bit One
OEM AMPLIFIER
(if any)
OEM HEADUNIT
OEM DVD/CD CHANGER
(if any)
OTHER DEVICES
(if any)
OEM DVD/CD CHANGER
(if any)
OTHER DEVICES
(if any)
OEM HEADUNIT
Output Stage
TOSLINK optical output S/PDIF max 48 kHz/16 bit PCM STEREO
Control Connection
From / to personal computer 1 x USB Mini B to A (2.0)
Input Stage
MOST optical input MOST IN/OUT socket connector
Power Supply
Voltage 8 ÷ 18 VDC
Idling current 150 mA
Switched off < 5 mA
Remote IN Automatic turn On/Off via MOST
Remote OUT 12 VDC (200 mA)
Size
W x H x D (mm / in.) 141,5 x 36,5 x 86,5 / 5.57 x 1.43 x 3.40
Weight (kg / lb.) 0,26 / 0.573
General Requirements
PC connection USB-A socket (1.1/2.0/3.0)
Software / PC requirements Microsoft Windows (32/64 bit):
XP, Vista, Windows 7, Windows 8
Graphic card min. resolution: 800 x 600
Ambient temperature range Operating: -40 °C to 85 °C
(-40°F to 185°F)
DIAGRAMS CONNECTIONS
After Installing the software, start it by clikking on
the icon shown on your desktop
Choose FT232R USB UART
Select Update
The software will ask you to select the fi le that
you have just downloaded from the Firmware
Upgrade section
http://www.audison.eu/bitdmi,
or that you previously saved in your PC.
The updating process will last from 1 to 5 minutes
and the green processing bar will prove the update
correct processing.
Select Next Choose FT232R USB UART Select Confi gure
Close all the doors of the vehicle and then the safety
locks. Wait 20 minutes before opening the vehicle
again and switching the audio system on.
Select the brand of the car and choose the
geographic area
Close the PC software windows
Switch on the digital instrument panel
20 Min.
PC CONFIGURATION
Note: If
the vehicle
features an
OEM MOST
amplifi er,
disconnect
the MOST
connector and restore the connection
as shown in the picture.
LIGHT’S DIRECTION OF TRAVEL
rev.C
*
ATTENZIONE: Codifi che audio surround multicanale DOLBY DIGITAL
(AC3), DTS o altre tecnologie proprietarie non possono
essere decodifi cati.
*
WARNING: DOLBY DIGITAL (AC3), DTS or other proprietary
multichannel sound-surround codecs cannot be decoded.
*
*