Users Manual

25
USER'S MANUAL
2. Analog inputs conguration
The inputs can be selected by clicking on
the system’s loudspeakers assigning the
corresponding channel number. Based
on the type of analog input there will be:
- Low Level the following input channels
are available: Front Left Full, Front
Right Full, Rear Left Full, Rear Right
Full, Center Full, Subwoofer.
In order to fully optimize the audio
system, connect all audio outputs of the
source to the bit One HD inputs, thus
obtaining a correct sound reproduction.
- High Level 12 input channels are
available and can be manually assigned.
In order to fully optimize the audio
system, connect all audio outputs of the
source to the bit One HD inputs, thus
obtaining a correct sound reproduction.
Remark: in this phase of the setup it is
possible to graphically dene the driving
side of the car Left (default) or Right.
Press BACK to go back to the previous step.
Press NEXT to continue with the conguration.
Press CANCEL to exit.
High Level inputs
Low Level inputs
7