Users Manual

38
USER'S MANUAL
5. Master Input Delay / Master Input Polarity
6. Channel Bandwidth Analysis
The presence of time delays on the inputs of the Head
Unit interfaced to the bit One HD Virtuoso can be
veried as well as any phase inversions of the applied
signal. This operation in PASS THROUGH mode has no
corrective action, it is only used to check the system
status.
- Press BACK to go back to the previous step.
- Press NEXT to continue with the conguration.
- Press CANCEL to exit.
IThe analysis procedure of the emission front performs
a study of the electrical frequency response coming
from the source’s various channels. This operation
is necessary to be able to reconstruct the exits at the
subsequent points following the trends of the inputs.
- Press BACK to go back to the previous step.
- Press NEXT to continue with the conguration
Follow the instructions listed below:
- set all tone controls to zero (0);
- set balance and fader to center (0);
- do not change the volume level previously set
through the inputs level automatic calibration;
- play track 3 (press Play);
- Analysis of the emission fronts.
The analysis procedure of the emission front performs
a study of the electrical frequency response coming
from the source’s various channels. This operation
is necessary to be able to reconstruct the exits at the
subsequent points following the trends of the inputs:
a. OEM source equalization response;
b. Electric response of the channel lters that make up
the front;
c. Display of the time delays of each individual channel
of the emission fronts.
And follow the instructions listed below:
- set all tone controls to zero (0);
- set balance and fader to center (0);
- do not change the volume level previously set through
the inputs level automatic calibration;
- play track 2 (press Play);
- Press BACK to go back to the previous step.
- Press NEXT to continue with the conguration.
- Press CANCEL to exit.
- Press BACK to go back to the previous step.
- Press NEXT to continue with the conguration.
- Press CANCEL to exit.
7