Users Manual

41
USER'S MANUAL
10. Processor outputs
(Ch1÷Ch13 IIR MODE) allocation.
The bit One HD Virtuoso features 13 output
channels. On this specic step of the procedure,
any signal can be assigned to each output
channel.
E.g.: the outputs 1 and 2 can be assigned to the
rear channels simply to avoid having to lengthen
the cables going to the specic amplier.
For a matter of convenience, if the output 1 is
assigned to the left woofers, the software will
automatically assign the output 2 to the right
woofers. If during the procedure the output 1 is
assigned also to the left mid-high speakers, the
software will show a warning message. Change
the allocation of one of the two numbers marked
in red and the software will automatically select
the rst available channel.
Press BACK to go back to the previous step.
Press NEXT to continue with the conguration.
Press CANCEL to exit.
9. Selection of passive crossovers for speaker groups
The presence of passive crossovers
managing speaker functional groups in
complex systems can be provided by the
user.
E.g.: the 3-way Front can be managed as:
- multi-amplied
(6 output channels would be required);
- passive mid-high speakers + separately
amplied woofer
(4 output channels would be required);
- 3-way passive
(2 output channels would be required).
While performing the setup, the software
will automatically notify the return within
the 13 output channel limit, the warning
message will then disappear and the
NEXT button will appear.
Press BACK to go back to the previous step.
Press NEXT to continue with the conguration.
Press CANCEL to exit.
7