Users Manual

77
USER'S MANUAL
By acting on the “Master Volume” function, you can adjust the system general volume (-60 ÷ 0 dB).
The “Subwoofer Level” function allows for the subwoofer output level adjustments (-12 ÷ 0 dB), when the
system features a subwoofer.
The “Limiter” function enables the limiter on bit One HD Virtuoso output level. This function is essential to
avoid the occurrence of temporary clipping, causing the outputs saturation. By selecting “Limiter” again, the
function will be disabled.
This section shows the settings related to the output level of the Master Volume and Sub Volume
of the bit One HD Virtuoso.
1
2
3
10
1 2
3
The “Selected Input” window will display the active source during the connection with the PC. Auxiliary sources can
be added or removed entering the Cong->Auxiliary Inputs menu and selecting the desired source
(see section 8.3.3).
Once you will have disconnected from the PC, the bit One H D input source can be selected via DRC MP.
To perform the sensitivity adjustment, refer to
section 8 of this user manual.
To change the input signal levels manually, once
the manual calibration has been performed, you
have two options:
a) Click on the + 3dB / + 6dB buttons to increase
the input signal by 3dB / 6 dB.
b) Select the Link check box, keeping the Ref
check active, so as to calibrate the input signal
levels
.
11
Sensitivity:
to perform the setting/display of the analog
inputs. Click on the icon for the Input Setup.
8.10 VOLUME LEVEL
8.11 SELECT INPUT
8