Users Manual

8
USER'S MANUAL
1. POWER SUPPLY / REMOTE IN-OUT (see section 5.1)
+BATT 12V: positive connection terminal for car 12V power supply
-BATT: negative connection terminal for car 12V power supply.
REMOTE IN: for the processor remote turn-on through one or multiple signal sources, featuring Rem Out control.
REMOTE OUT: for the remote turn-on of the other devices/ampliers connected to the processor.
The REMOTE OUT output has a current capability of 130 mA (it can also drive an automotive relay).
The processor only takes 7 seconds to supply the REM OUT to the output after turn on.
WARNING: make sure the connection polarity is as indicated on the terminals. A misconnection may result in
damage to the bit One HD Virtuoso. After applying a 12V power, wait at least 10 seconds before turning the
bit One HD Virtuoso on.
WARNING: the bit One HD Virtuoso must be switched on before the ampliers connected are turned on. It is
necessary to connect the sources Remote Out to the bit One HD Virtuoso Remote In and then the
bit One HD Virtuoso Remote Out to the Remote In of the other devices / ampliers connected to the
bit One HD Virtuoso
(section 5.1)
Remark: the Remote Out signal is available on the AC LINK 1 / AC LINK 2 connection plugs and is active to the
ampliers supporting this function (Audison AV ampliers with AV bit IN input).
2. DRC: connection plug for the DRC MP (Digital Remote Control), to control the processor’s functions
3. DRCC: terminals for future use.
4. SDC: terminals for future use.
7 8
9
6
2
3 4
5 1
SDCDRCC
4.3 INPUTS - REMOTE CONTROL OUTPUTS AND POWER SUPPLY
4