Users Manual

81
USER'S MANUAL
4. Bass Boost: when enabled, this function
operates on the sub and woofers channels.
By selecting Settings the parametric
equalization pole to be set up can be selected
and the “Q” factor can be changed with the
use of a mouse featuring a rotating nger
wheel.
To operate on the parametric equalizer the
setup window can also be used (as shown in
the image to the side), providing a more
detailed setting on the following parameters:
1. operating frequency.
2. parametric pole gain.
3. Q factor.
To use this function click on the button to the
left of the menu until the orange led lights
up. To disable the function click again on the
button until the orange led turns off. This
function can be enabled and disabled also via
DRC MP.
5. Delay Comp./Polarity Check: this function shows
the result of the analysis performed during
the "I / O CONFIGURATION WIZARD" concerning
the presence of time delays, possible compensation
and the result of the correct electric connection of
the wiring to the inputs of the bit One HD Virtuoso.
1 2 3
This window shows whether the bit One HD Virtuoso
is properly interfaced with the PC and the DRC MP. It
also shows the Firmware version for the device and
the Serial Number.
The background of the device info assumes two colors:
- Blue background: IIR setup.
- Green background: FIR setup.
13
Device Info IIR mode
Device Info FIR mode
8.13 DEVICE INFO
8