Users Manual
Table Of Contents
- Index
- 1. PRODUCT DESCRIPTION
- 2. PACKAGING CONTENTS
- 3. bit One HD Virtuoso AND DRC MP INSTALLATION
- 4. CONNECTION PANELS - DESCRIPTION
- 5. CONNECTIONS
- 6. bit One HD Virtuoso SOFTWARE AND DRIVERS - INSTALLATION GUIDE
- 7. bit One HD Virtuoso SETUP WITH PC
- 8. bit One HD Virtuoso SETUP USING A PC
- 9. TROUBLESHOOTING
- 10. TECHNICAL SPECIFICATIONS
- 11. ADDENDUM
85
USER'S MANUAL
6. Once you have clicked on OK, the Firmware update
procedure starts. This process will last between 30
seconds and 1 minute; the progress bar and the
flashing logo on the bit One HD Virtuoso will show the updating
process status.
7. Place the “UPGRADE” switch to OFF position.
8. Disconnect and the connect again the bit One HD Virtuoso
terminal block.
9. Turn bit One HD Virtuoso back on and restart the PC software.
If bit One HD Virtuoso rmware update has been completed
correctly, the dialog window will display the following:
- new bit One HD Virtuoso Firmware version.
10. Repeat the product calibration operations
(see sec. 7.2).
USB
Update
ON OFF
TARGET MODE
9