Technical data

f. Mount the side handle back: see
g. Reassemble the glass panel: see
- 17 -
Pre-setting
Caution!: if you change BIAS switch setting,
idling current when off (without signal) varies
as follows:
Dual Power BIAS Current (A)
Hi Current L 4.2
Hi Current H 6.5
Hi Power L 5.6
Hi Power H 10.4
a. Remove the glass panel: see
b. Set BIAS switch on L (LOW – pre-setting) or on H (HIGH)
c. Reassemble the glass panel: see
BIAS L BIAS H
e. Mount power supply terminal blocks
protecting panel
SIDE HANDLES REMOVAL
6 OWNER’S MANUAL
GLASS PANEL REMOVAL
5 OWNER’S MANUAL
GLASS PANEL CONFIGURATION
5 OWNER’S MANUAL
DUAL BIAS CONFIGURATION
OWNER’S MANUAL
9
GLASS PANEL REMOVAL
5 OWNER’S MANUAL
DUAL POWER CONFIGURATION
OWNER’S MANUAL
8