Specifications

25
Digital domainClassic domain
ADVANCED MANUAL / TH quattro
180 Hz
12 dB
180 Hz
12 dB
180 1.8k Hz
Hi-pass Lo-pass
12 dB12 dB
Electronic Crossover
TH in 3 Ch Mode
Filtering B channels
TH in 2 Ch Mode
Filtering A channels (Left) and B channels (Right)
Setup Xover Slope 12 dB
(default configuration)
When the amplifier is set up in a mono configuration, it is possible to set
the crossover slope at 12 or 24 dB/Oct.
- The TH-MXR.1 board must be inserted;
- You need to operate on the ASC specific Setup Amplifier step. (See
page 46).
Through the Status Monitor it is possible to check anytime the presence
of the filter as well as the set slope.
Disabled
Disabled