User manual

When the SSID for the wireless network you wish to connect to is highlighted on the

screen, press the

Tuning/Seek/Select control

. If WiFi Protected Setup (WPS) was

indicated, you will see an additional menu at this point, otherwise proceed to step 7.

Choose one of the WPS menu options as required for your router (WPS may be via

push button, or using an identication number).

'WPS Button': the display prompts you to press the WPS button on your router and then

the

Select control

on the sound system. The two devices should then connect with the

encryption key sent automatically to the sound system.

'WPS PIN': the display shows an identication number which you must enter into your

router using a web browser (refer to your router's user documentation). You should then

press the

Select

control

on the sound system.

The two devices should then connect with the encryption key sent automatically to the

sound system. 'Skip WPS' - if you wish to enter the encryption key yourself (or if it was

previously entered).

If you choose 'WPS Button' or 'WPS PIN' the screen will then show 'Connecting...' and

then 'Setup wizard completed'. Press the

Tuning/Seek/Select control

to exit the setup

wizard.