User manual
FM RADIO
Operating in FM mode
Carefully adjust the rod antenna and press the
Power button
to switch on Audisse
Shokunin.
Press the
Source button
as needed to select FM radio mode.
Rotate the
Tuning/Seek/Select control
in a clockwise direction. The displayed
frequency will increase. Press the
Tuning/Seek/Select control
to carry out an auto-
tune. Your radio will scan up the FM band from the currently displayed frequency and
will stop scanning when it nds a station of sufcient strength.
The display will show the frequency of the signal which has been found. If RDS
information is available, after a few seconds the display will show the radio station name.
If you only hear hiss or interference, simply press the
Tuning/Seek/Select control
to
scan further. Audisse Shokunin may have found a spurious interference signal.
GB
24