User manual

Rotate the

Tuning/Seek/Select control

until the 'Volume:' option is highlighted on

the display and press the

control

if you wish to change it. The sound system uses

the saved volume setting for each alarm when it sounds. Rotate the

control

to set the

required volume and then press the

control

to conrm the setting.

In order to store the alarm settings rotate the

Tuning/Seek/Select control

until

'Save'

is highlighted. Press the

control

to store the alarm settings. Your radio will show

'Alarm

saved'

and will then go back to the list of alarms with the new alarm setting shown in

the display. If you decide not to save the settings, press the

Back button

. The display

will show

'Save changes'

with a

'YES'

'NO'

option. Rotate the

Tuning/Seek/Select

control

to choose

'NO'

and then press the

control

'Alarm not saved'

will show on

the display. Active alarms are shown using small alarm indicators at the bottom of the

playing displays and on the clock display when in standby.