User Manual

Transducer Type Dynamic
Frequency Response 50 Hz - 16 kHz
Polar Pattern Cardioid
Output Impedance 250 ohms
Sensitivity 1.8 mV/ Pa @ 1k
Off Axis Rejection > 20 dB @ 180
o
Maximum SPL ≥ 138 dB
Power Requirements None
Connector 3 pin gold plated male
XLR connector
Polarity Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3 of output
XLR connector
Housing / Finish Zinc Alloy /
Black E-coat
Weight 312 g / 11 ounces
Length 169 mm / 6.7 inches
SPECIFICATIONS:
ARCHITECTS AND ENGINEERS SPECIFICATIONS:
The microphone shall be of the dynamic type operating on the moving coil principle and
the polar pattern of the microphone shall be cardioid. The nominal output impedance
shall be equal to 250 ohms at 1 kHz. The microphone shall have a sensitivity of 2.5 mV
/ Pa at 1 kHz and a sound pressure level ≥138 dB. The microphone body shall be of
die cast zinc alloy and the grill of steel mesh. The overall dimensions shall be 23 mm
in diameter at the base, 52.5 mm at the widest point on the grill, and 169 mm in length.
The microphone shall be the Audix f50.
OPERATION:
The f50 is a low impedance microphone and should be plugged into a “mic level” input
on your console, mixer or recording device. Please note that your microphone does
not require phantom power, however, the microphone will not be effected in any way
by phantom power should it be running simultaneously when the microphone is in
operation. Avoid plugging or unplugging the microphone from a PA system unless the
channel is muted or the volume of the system is turned down. Failure to do so may
result in a loud “popping” noise which could seriously damage the speakers in the PA
system.
USER TIPS:
The f50 has a tight (cardioid) pick-up pattern in order to help eliminate sound from
other instruments on stage from “bleeding” into the microphone. Operating distance
for vocal application can vary between 2-6 inches depending on how many other
instruments are on stage, the volume of the music and the type of monitors being
used. When using oor monitors, position the microphone so that it is parallel to the
oor. When using multiple microphones on a live performance stage, allow a distance
of 2-3 feet between mics to avoid phase issues.
*Further miking techniques may be found on our website at www.audixusa.com
FREQUENCY / POLARS:
DIMENSIONS (mm):
F50
SERVICE AND WARRANTY:
This microphone is under warranty for a period of 5 years from
any and all manufacturing defects. Should your microphone
fail in any way, please contact the Audix service department
at 503-682-6933. A Return Authorization number is required
before returning any products.
CARE AND MAINTENANCE:
The F50 is manufactured to exacting specs with road worthy construction.
However, the capsule is highly sensitive and should be handled with care.
Avoid extreme temperatures and be sure to store your microphone in the
pouch provided when not in use. Moisture of any kind can adversely affect
the sound and performance of your microphone.
***All specications subject to change without notice.
www.audixusa.com
503-682-6933 Fax: [phone]
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
AUDIX WARRANTY REGISTRATION FORM
Please Check all that apply:
Male Female
Age: Occupation: Primary Instruments: Product to be used for:
18 or Under Musician Vocal Pro live sound
19-25 Producer Guitar / Bass Pro recording
26-35 Sound Eng. Drums Home recording
36-45 Radio/TV Keyboard Rehearsal
46-55 Production Brass Installation
55 + Other _______ Woodwinds School
Strings House of Worship
How did you hear about Audix? Other ___________ Other ___________
Magazine Ad Online Ad
Online Store Friend Do you own other Audix Products? Yes No
Salesman Other __________ Model(s) ________________________________
Have you visited the Audix website? Yes No
Please register your product online at www.audixusa.com or mail this form to:
Audix Microphones P.O. Box 4010 Wilsonville, OR 97070
Name:________________________________ Model:___________________
Company:_____________________________ Serial Number:_____________
Address:______________________________ Store:____________________
City:_________________________________ Store Location:_____________
Prov./State:___________ Zip:_____________ Purchase Date:_____________
Phone: ( )___________________________ Signature:_________________
Email:________________________________ Date:____________________
ver 1.2 1/12