User's Manual

8
6. Turn on receiver.
7. On receiver, press and hold the UP or DOWN button to trigger Scan for a clear
Group/Channel. After 8-20 seconds a Group/Channel˝ will appear on the receiver.
6
7
8
8. Sync handheld transmitter to
receiver. Unscrew the battery cover and
locate the window housing infrared
device. From a close proximity (6 inches
/ 152.40 mm) point the infrared window
(located on the opposite side of the
batteries) towards the infrared sensor
next to the SYNC button on the receiver
and press the SYNC button. Within a few
seconds the transmitter Group/Channel
and Frequency will match the receiver.
9. Sync bodypack transmitter to
receiver. Locate the window housing
infrared device on the front of the
bodypack. From a close proximity (6
inches / 152.40 mm) point the window
below the LCD screen on the bodypack
towards the infrared sensor next to the
SYNC button on the receiver and press
the SYNC button. Within a few seconds
the transmitter Group/Channel and
Frequency will match the receiver.
QUICK SET UP GUIDE