Data Sheet

ManualsBrandsAudix ManualsDrum MicrophonesD4

OVERVIEW:

Designed, machined, assembled and tested by Audix in the USA,

the D4 is a dynamic instrument microphone used for stage, studio

and broadcast applications. The D4, which is characterized with a

hypercardioid pickup pattern for isolation and feedback control, is

equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate

sound reproduction.

The D4 is lightweight, compact and easy to position. With a wide

frequency response of 40 Hz - 18 kHz and the ability to handle sound

pressure levels in excess of 144 dB, the D4 is an excellent choice for

miking instruments requiring precise low frequency reproduction such as

large rack toms, oor toms, cajon, djembe, tympani, leslie bottom, bass

ute, sax and baritone sax, trombone, acoustic bass, bass cabs and

small kick drums.

Roadworthy construction includes a precision machined aluminum body,

black anodized nish, laser etched model and serial number, steel mesh

grill, Switchcraft® XLR connector and includes a tension-t heavy duty

nylon mic clip.

Transformerless design, low impedance, and balanced output allow for

interference-free performance even with long cable runs.

APPLICATIONS:

Floor toms

Kick Drum

Bass Cabinets, Leslie Bottom

Djembe, Cajon, Digeridoo

Piano

Sax, Trombonem Clarinet

Studio -

Any instrument requiring precise

low frequency reproduction

DYNAMIC INSTRUMENT MICROPHONE

SUPPLIED ACCESSORIES:

Tension-fit heavy duty nylon mic clip (DCLIP)

Carrying pouch (P1)

OPTIONAL ACCESSORIES:

TRIPOD - Tripod mic stand

DFLEX - All purpose percussion clamp

DVICE - Spring loaded rim mount clamp

DCLAMP - Tension rod mic clamp

CBL-20 - 20’ XLR-XLR mic cable

CBL-DR25 - 25’ right angle XLR-XLR mic cable

STAND-KD - Adjustable kick drum mic stand

CAB GRABBER - Tension held mic holder, clamps to guitar cabinets

DCLAMP DFLEX DCLIP CAB GRABBER STAND-KD

FEATURES:

Compact, lightweight

Machined aluminum body

VLM (very low mass) diaphragm

Studio quality sound

Excellent mid-bass transient response

Handles extremely high SPL without distortion

Roadworthy construction

5 year warranty

Dynamic Instrument

Summary of content (2 pages)

PAGE 1
Dynamic Instrument D4 DYNAMIC INSTRUMENT MICROPHONE OVERVIEW: Designed, machined, assembled and tested by Audix in the USA, the D4 is a dynamic instrument microphone used for stage, studio and broadcast applications. The D4, which is characterized with a hypercardioid pickup pattern for isolation and feedback control, is equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate sound reproduction. The D4 is lightweight, compact and easy to position.
PAGE 2
D4 SPECIFICATIONS: Transducer Type Frequency Response Polar Pattern Output Impedance Sensitivity Capsule Technology Off Axis Rejection Maximum SPL Power Requirements Connector Dynamic 40 Hz - 18 kHz Hypercardioid 200 ohms 1.4 mV / Pa @ 1k VLM Type D >20 dB ≥144 dB None Switchcraft® male XLR connector Positive voltage on pin 2 relative to pin 3 of output XLR connector Machined Aluminum / Black Hard Coat 128 g / 4.5 ounces 100 mm / 3.