User Manual

QUICK START GUIDE
GETTING STARTED
The radio is powered by the built-in lithium battery. A USB cable is supplied in the product package for battery charging.
Power on the radio by turning the <Power/Volume>
knob to clockwise direction. The radio will power up and enter into
Standby. Press the <Standby> button to turn it on.
To turn it into standby, press the <Standby>
button. If you want to power off the radio, turn the <Power/Volume> knob anti-
clockwise until you hear the click and the screen is off.
CHARGING BATTERY
Always check the battery indicator on the top right corner of the screen to see the battery power status.
When battery power is low, the battery indicator will keep blinking as a reminder for battery charging.
To charge the battery, connect the micro USB plug to the port at the rear side of the radio, connect the other end to a power
source supplied in 5V OUT. The LED will light up in red indicates the battery is charging.
The LED will turn to green when charging is done.
Note: The charging might take much longer to complete if the radio is playing or in standby while charging.
DAB MODE
If this is the first time using the radio, it will start on DAB. If not, press the <MODE> button on the radio to change to DAB
mode. The radio will start scanning all the available radio stations as follow:
The scanned station list will be displayed after the scan is done. Use the <TUNE/SELECT> knob to select the radio station.
When a radio station is playing and you want to choose others to play, rotate the <TUNE/ SELECT> knob.
Press the <INFO/MENU> button repeatedly to cycling through the radio information.
Note: Always adjust the length and direction of the telescopic antenna to optimize the best reception level.
FM MODE
Select the FM mode, press and hold the <SCAN> to initiate the auto scan. The radio will store the preset automatically when
the scan is done.
To manual adjust the frequency , rotate the <TUNE/ SELECT> knob to tune the frequency in the step of 0.05MHz.
PRESET A STATION
Your radio can store up to 20 DAB stations and 20 FM stations in its preset memories for instant access to your favorite
stations.
1. Tune your radio to the station that you wish to preset.
2. Press and hold <
> button on the radio, it will enter the "Preset Store" list. Select the preset number you want to
save by using the <TUNE/SELECT> knob, press the <TUNE/SELECT> knob to confirm. It will show the preset number
is saved.
3. There are 3 preset buttons on the radio. It allows to save and recall quickly a dedicated channel. Press and hold the
button to store the channel.
4. You can replace the existing preset with other channel by doing the same preset procedure as described above.
RECALL A STATION PRESET
Briefly press the <
> button on the unit, the preset list will pop up. Rotate the <TUNE/SELECT> knob to find the station you
want to listen, then press <TUNE/SELECT> knob to recall the station.
If you have preset the favourite channels for Preset button 1-3, simply press these buttons to access them quickly.
Note:
1. If there is already an existing DAB or FM station stored under a preset, it will be overwritten when you save a new station.
2. The DAB presets will not overwrite the FM station presets.