User Manual

5
1. Unpack the digital radio and remove all packing materials.
2. Completely unwind the power cord and plug it into the wall outlet.
• Press the ON/STAND-BY button to turn the power off.
• Press and hold the CLOCK/TIMER button 2 seconds, to adjust the day.
• Press [ ] Or [
] to choose 12h / 24h display format and confirm with CLOCK/TIMER.
• To set the hour, use [ ] Or [
], then press CLOCK/TIMER.
• Repeat, to set the minutes.
In this example, the clock is set for the 24-hour (0:00) display.
• Press the CLOCK/TIMER Button once to turn the TIME function on. The TIME indicator will appear in the DISPLAY.
• Press the CLOCK/TIMER button 2 seconds, Operation again CLOCK/ TIMER button until ”ON” Appears.
• Press [ ] Or [
] to select Timer set and press the CLOCK/TIMER button.
• Press [ ] Or [ ] to select “OFF”, and press the CLOCK/TIMER button.
• Set the time to finish as in steps 3 and 4 above.
• To select the timer playback source (TU, CD, USB), press the or button. Press the CLOCK/ TIMER button.
• Adjust the volume using the VOLUME (+ or -) on the main unit or VOL +/- on the remote control, and then press the
CLOCK/TIMER button. Do not turn the volume up too high.
• The indicator lights up and the unit is ready for timer playback.
This function allows you to program the system to switch off itself after a set period of time. You can set your sleep time in
power on mode:
• To activate the sleep function, press the SLEEP button on the remote, the display will show “SL 90, 80, 70, 60, 50, 40, 30,
20, 10, 00” .
• When the display shows your desired sleep time, release the button, the sleep timer is now activated. The display will
show “SL10” is to indicate “10 minutes” sleep time and so on. When the sleep time counts to zero, the unit will go off.
• To cancel sleep, press the SLEEP button once again until you see ‘’SL00’’, the sleep function will turn off.
You can use the FM Scan function to automatically scan for new digital radio stations and remove inactive stations.
Press and hold the PLAY / PAUSE / FM SCAN button on the stereo system or on the remote control for 2 seconds to select [Scan].
Scan will be displayed during the automatic station scan. When the automatic
station scan is finished, the last station
listened to will be tuned in. If the last listened station is not available, the first station in the alphabetical list is tuned
in.
To manually tune in a specific radio station, tap the [ ] Or [ ] button on the stereo or remote control repeatedly.
STATION STORE
Calling up saved stations
If you are in radio mode, you can call up the stored radio stations by repeatedly pressing PRESET LEFT or PRESET RIGHT on the
remote control. When
you access the preset stations for the first time, [P01] blinks on the display.
• Use a connection lead to connect the portable audio player etc. to the AUDIO IN socket
• Press the ON/STAND-BY button to turn the power on.
• Press the SOURCE button on the remote control or main unit repeatedly to select AUDIO IN function.
• Play the connected equipment. If volume level of the connected device is too high, sound distortion may occur. Should
this happen, lower the volume of the connected device. If volume level is too low, increase the volume of the connected
device.
The AUDIO IN terminal allows you to connect various devices such as an MP3 player, cassette player, minidisc player, DVD
player, etc.