User manual

Preparation
46 COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
Note: The telephone can be operated not only on an internal S
0
port but
also on a U
P0
port on the PBX. Only one telephone per U
P0
port can be con-
nected. Also see the instructions of the PBX.
Warning: Liquid entering the casing can cause life-threatening electric
shocks and damage or destroy the telephone.
 Only operate the telephone in closed, dry rooms.
Caution: Mechanical stress and electro-magnetic fields can result in the
damage or destruction of the device or impairment of its functions.
 Avoid mechanical loads (e.g. vibrations).
 Avoid the proximity of devices which radiate electro-magnetic fields (for
example, radio sets, professional radio equipment, amateur radio
equipment, mobile phones, DECT systems, WLAN routers, etc.).
 Do not expose the device to direct sunlight.
 Protect the device from dirt, excessive dust, condensation, caustic liq-
uids, and steam.
 Note the values for ambient temperature and humidity given in the tech-
nical data.
Assembling the Telephone
• Place the telephone on a clean, flat surface.
Caution: Some paints or plastics used on furniture may react chemically
with the plastic feet on the device and cause them to soften. Plastic chem-
ically changed in this way on the feet of the device may cause damage to
the surface of your furniture.
 Place the telephone on a non-slip pad.