Technical data

198 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Group Functions
Configuring and Operating Function Key for Logging Out of All Groups
6. Tap on .
7. Select a group based on its name/number.
8. Tap on .
9. Enter a name for the group. The following entries are possible:
10. Only when the kind of key defined has been selected: Select the action. Tap on
to switch over between the different actions.
11. Only when the kind of key defined has been selected: Tap on to switch over
between the different directions.
12. Tap on .
Requirements for operating the function:
– Authorisation in the PBX for Controlling of the PBX using the telephone
Configuring and Operating Function Key for Logging Out of All Groups
Press the key while the telephone is in the idle state to log the telephone out of all groups.
The configuration can be carried out as follows:
general: Press the key to select the action and direction of the group
configured.
defined: Executes the action specified for the group configured.
Up to 16 digits
Digits and characters
log out: Press the key to log the telephone out of the group.
logging in: Press the key to log the telephone into the group.
log over: Press the key to change the log in status.
inbound: Select the type of call for incoming.
outgoing: Select the type of call for outgoing.
inbound & outbnd: Selects the type of call for incoming and outgoing.
LED signalling on the key:
None