Technical data

COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 199
Functions
Group Functions
Configuring and Operating Function Key for Logging Out of All Groups
• Using COMfortel Set
• Using the telephone
Using COMfortel Set to Configure the Function Key for Logging Out of All Groups
Requirements:
– The telephone is a member of a group configured in the PBX
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Group functions off function.
The current settings for defining the key are displayed.
5. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation in the PBX for Controlling of the PBX using the telephone
Using the Telephone to Configure the Function Key for Logging Out of All Groups
Requirements:
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters