Technical data

COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 223
Functions
InterCom Announcement/Handsfree
Configuring and Operating Function Key for InterCom Handsfree
7. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label and for display.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Existing InterCom authorisation at the InterCom destination
Using the Telephone to Configure the Function Key for InterCom Handsfree
Requirements:
– Existing InterCom authorisation at the InterCom destination
1. Press the menu key and open the define keys menu.
2. Press the function key that you would like to define.
3. Select one of the following options:
The list of available functions is displayed.
4. Select the InterCom function and then IC speakerphone.
The current settings for defining the key are shown on the display.
5. Tap on .
6. Select the InterCom destination from the list.
7. Tap on .
8. Enter a name. Possible entries:
Up to 16 digits
Digits and characters
first level: Keys are defined on the first key level.
second level: Keys are defined on the second key level.