Technical data
230 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Configuration Switchover
Configuring and Operating Function Key for Configuration Switchover
Requirements for operating the function:
– Authorisation in the PBX for Configuration switching
Using COMfortel Set to Configure the Function Key for Defined Configuration
Switchover
Requirements:
– At least two configurations set up in the PBX
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Defined config. on function.
The current settings for defining the key are displayed.
5. Configure the settings dependent on the type of PBX.
• Select a configuration in the configuration to be activated list field.
• Enter the identification number of the configuration in the identification number
field.
6. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label and for display.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters