Technical data

234 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Loudspeaker Audio Out
Configuring and Operating Function Key for Loudspeaker Audio Out
5. In the Telephone no entry field, enter the internal telephone number for the audio
output.
6. In the Kind of action list field, select one of the following options:
7. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label and for display.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation in the PBX for Speaker announcement
Using the Telephone to Configure the Function Key for InterCom Permission
1. Press the menu key and open the define keys menu.
2. Press the function key that you would like to define.
3. Select one of the following options:
The list of available functions is displayed.
4. Select the InterCom (Auth) function.
The current settings for defining the key are shown on the display.
5. Tap on .
6. Select the loudspeaker from the list.
hold: The key must be held down during the announcement.
switch over: A short press of the key starts the announcement. Another short
press of the key ends the announcement.
Up to 16 digits
Digits and characters
first level: Keys are defined on the first key level.
second level: Keys are defined on the second key level.