Technical data

260 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Call Forwarding
Switching Call Forwarding for Subscribers On/Off
If "CF on busy" and "CF on no reply" are enabled at the same time, both
kinds apply. Depending on which case occurs – the telephone is busy or
nobody answers it – the call is forwarded to their respective telephone
numbers.
If "CF unconditional" is enabled in addition to the "CF on busy" and/or "CF
on no reply," all of the calls are forwarded immediately. In this case, the other
kinds of call forwarding are overridden, but remain enabled. As soon as "CF
unconditional“ is disabled, the other kinds that are still enabled are again
applicable.
Switching Call Forwarding for Subscribers On/Off
Switching this on/off can be done as follows:
• Using the telephone
Requirements:
– Authorisation in the PBX for Controlling of the PBX using the telephone
– For external destination numbers: Authorisation assigned in the PBX for Configuring CF
(sub) to ext. number
To enable or disable call forwarding for subscribers, press the function key configured for call
forwarding (subscribers).
Alternatively, proceed as described below.
1. Press the menu key and open the menu functions > Call fwd.:scr.
2. Select one of the following options:
3. Select one of the following options:
deactivate all: Disables all currently enabled call forwarding for subscribers.
(No other action is required.)
unconditional: Switches call forwarding unconditional for subscribers on or
off.
on busy: Switches call forwarding on busy for subscribers on or off.
on no reply: Switches call forwarding on no reply for subscribers on or off.