Technical data

266 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Call Forwarding
Configuring and Operating Function Key for Call Forwarding for Subscribers
Using COMfortel Set to Configure the Function Key for Switching Call Forwarding for
Subscribers Off
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Switch off all subscriber CF function.
The current settings for defining the key are displayed.
5. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation in the PBX for Controlling of the PBX using the telephone
– For external destination numbers: Authorisation assigned in the PBX for Configuring CF
(sub) to ext. number
Using the Telephone to Configure the Function Key for Call Forwarding for Subscribers
1. Press the menu key and open the define keys menu.
2. Press the function key that you would like to define.
3. Select one of the following options:
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
Up to 16 digits
Digits and characters