Technical data

272 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Call Forwarding
Configuring and Operating Function Key for Call Forwarding for External Numbers
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation assigned in the PBX for Features to be configured by the network provider
(CF, keypad)
Using COMfortel Set to Configure the Function Key for Call Forwarding on Busy for
External Numbers
1. Open the page Function keys > Assign function keys.
2. Only available in installed extension modules: In the telephone displayed at the top
left, click the key group in which you would like to define keys.
3. Click one of the following tabs:
4. Right-click the function key you want to assign.
A function selection dialogue opens.
5. Select the CF on busy (MSN/DDI) function.
The current settings for defining the key are displayed.
6. In the Kind of switching list field, select one of the following options:
Up to 16 digits
Digits and characters
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
switch off: Pressing the key disables call forwarding on busy for external
numbers.