Technical data

COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 275
Functions
Call Forwarding
Configuring and Operating Function Key for Call Forwarding for External Numbers
7. In the Telephone no entry field under Your own exchange line, enter the external
phone number to be forwarded on the PBX (with a prefix). The following entries are
possible:
8. In the Telephone no entry field under Destination of Call Forwarding, enter the
destination number (with exchange line access number). The following entries are
possible:
Click to accept a telephone number from the telephone book in the Telephone no
entry field.
9. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– Authorisation assigned in the PBX for Features to be configured by the network provider
(CF, keypad)
Using COMfortel Set to Configure the Function Key for Switching Call Forwarding for
External Numbers Off
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
Up to 24 digits
Digits and the characters * and #
Up to 24 digits
Digits and the characters * and #
Up to 16 digits
Digits and characters
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.