Technical data

280 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Call Restrictor (Incoming) – Robinson Numbers
Configuring and Operating Function Key for Call Restrictor (Incoming)
The configuration can be carried out as follows:
• Using COMfortel Set
• Using the telephone
Using COMfortel Set to Configure the Function Key for Call Restrictor (Incoming)
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Call restrictor - incoming (Robinson no.) function.
The current settings for defining the key are displayed.
5. In the Kind of switching list field, select one of the following options:
6. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
LED signalling on the key:
Red The call restrictor is enabled.
Off The call restrictor is disabled.
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
switch off: Pressing the key enables the call restrictor.
switch on: Pressing the key enables the call restrictor.
switch over: Pressing the key switches the call restrictor on or off.
Up to 16 digits
Digits and characters