Technical data

COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 319
Functions
Waiting Field Function
Configuring and Operating Function Key for Internal Waiting Field
Using COMfortel Set to Configure the Function Key for Internal Waiting Field
1. Open the page Function keys > Assign function keys.
2. Click the Level 1 tab.
Important: Configuring this function is only possible on the first level. The
second level is then blocked. If a function has been assigned to the second
level, it is deleted.
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Waiting field (internal) function.
The current settings for defining the key are displayed.
5. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
– Save your configuration before closing.
Requirements for operating the function:
– The telephone has been selected in the PBX as a waiting field reception
Using the Telephone to Configure the Function Key for Internal Waiting Field
1. Press the menu key and open the define keys menu.
2. Press the function key that you would like to define.
3. Select first level.
Up to 16 digits
Digits and characters