Technical data

COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 327
Functions
Speed Dialling
Configuring and Operating Function Key for Speed Dialling
Note: The key name is used for printing the label and for display.
Further steps:
– Save your configuration before closing.
Using the Telephone to Configure the Function Key for Speed Dialling
1. Press the menu key and open the define keys menu.
2. Press the function key that you would like to define.
3. Select one of the following options:
The list of available functions is displayed.
4. Select the speed dialling function.
The current settings for defining the key are shown on the display.
5. Tap on .
Note: If you press the telephone book key before entering the destination
number, you can select the desired phone number from the telephone book.
6. Enter the destination number. The following entries are possible:
Important: Enter telephone numbers exactly as when dialling, for example,
external telephone numbers always with a leading exchange line access
number. (exception: direct exchange access). The default exchange line
access number on the PBX is "0" in the factory settings; however, this can be
changed for several PBXs (see instructions for the PBX).
7. Tap on .
8. Enter a name. Possible entries:
first level: Keys are defined on the first key level.
second level: Keys are defined on the second key level.
Up to 40 digits
Digits and the characters * and #