Technical data
16
Configure the Call Distribution
17
Save Settings into a File and in the PBX
Internet Access via Dial-up Networking
18
Configure an Internet
Connection for the
Dial-up Networking
Always enter the local area code (your own/provider) without the first „0“.
Contact an Internet Service Provider to receive the user name, password, ISDN dial-up number etc. (a registration may be necessary).
Under Windows 98 you have to install the Dial-up network, before you can continue with the here described Internet settings. This and a detailed description of the
Internet setting can be found in the CAPI/TAPI manual on the Auerswald Mega Disk.
In case of channel bundling there are two chargeable connections to the provider. Make sure that the provider is supporting the channel bundling.
19
Internet Dial-up
If you have received a CD from your Internet Service Provider, insert it into the CD drive. The here described procedure may change then.
To avoid the following steps and therefore to simplify the dial-up to the Internet, you can configure your Internet browser (e.g. the Microsoft Internet Explorer) to
establish a connection automatically via dial-up networking when entering an address (e.g. activate in the Internet Explorer via „Extras ... Internet options ... Connections
... always select standard connection“, see also manual/help of the corresponding browser).
Click on this button,
to present the external
telephone numbers assigned to
Example: When using this setting
only the internal telephone 31 rings
in case of a call to the external
telephone number „92000“. If
the internal telephones also to
the caller.
nobody takes the call, the telephone
33 rings additionally (or if subscriber
33 is an answering machine, this
one will accept the call).
After saving in the PBX
a reset happens automatically
(LED „State“ glows red/orange).
As soon as the LED does not glow
orange anymore, you can telephone
and your telephone will ring
und
Enter any name.
Select „USB“ interface.
according to the call distribution.
☞
Windows 2000
ISDN dial-up number of
configure channel bundling (option) configure dynamic channel bundling (option)
your user name and password
from the provider
any avail. name
the provider
area code without „0“
exch.line access no.„0“ (optional)
20
21
22
23
24
25
26
27
28
29
30
31
33
32
34
35
36
37
Windows XP
Ortsvorwahl
exchange line access number „0“ (option)
channel bundling is active deactivate channel bundling (option)
beliebiger Name
ISDN dial-up no. of the provider
your user name and password from the provider
21
22
23
24
25
28
26
27
29
30
31
32
33
ohne
„0“
☞
Windows 2000
User name from the provider
Password from the provider
Windows XP
User name from the provider
Password from the provider
The connection symbol in the Windows task bar
(at the left side next to the time) shows the active connection status.
Double click on this symbol for detailed information or terminate
The open dialog will show you among other information how long this
After the Internet dial-up you can open a browser e.g.
the Microsoft Internet Explorer to view Internet pages.
the connection.
Internet connection already lasts and how many data has been
transferred already.