User's Manual

Appendix K: Tablet Computer User Guide
NOTE: Make sure one of the buttons is assigned to Reference, so you can easily display the Virtual
Desktop overlay for the tablet and pen button mappings.
Customizing the optional pen
Customize settings for pen tip feel and pressure, eraser feel, side button, and application-specic pen
functions.
To customize your pen:
1. Open the HP Create Control Panel app.
2. Select the device you are customizing in the Device section.
NOTE: If you have not added other devices, the default HP ZBook x2 is selected.
3. Select ZBook x2 Pen in the Tool section.
4. Select All in the Application section to customize settings for all applications.
– or –
Select a specic application.
5. Select the Pen tab and choose from the available options.
6. Follow the on-screen instructions. For more information about possible entries, see Button functions
on page 34.
NOTE: The tip must be set to Click to draw in most graphics applications.
NOTE: The Tip Feel slider overrides the advanced pressure settings selected using the Customize
button.
Advanced customizing for the pen
To further customize tip or eraser pressure settings:
1. Select the Pen or Eraser tab.
2. Click on the Customize button.
Options within the Pen Feel Details dialog box let you independently change the tip or eraser pressure
sensitivity and click threshold settings.
3. Use the line on the left to adjust your pen settings. The pressure controls are displayed as symbols on
the line that can be moved to change the outcome.
●
Click Threshold determines the amount of force required to register pressure or generate a pen
click.
●
Sensitivity changes the slope of the pressure response curve.
●
Max Pressure determines how hard you must press the pen tip to reach maximum pressure.
4. Use the Try Here box to test the results of your changes.
5. Select OK to save your changes.
Customizing tools 33
J-43