User's Manual

Appendix J: All-In-One Computer User Manual
TM-5010-24P/24F User’s manual
26
Serial Port 5 Configuration
Serial Port
Enable or Disable Serial Port (COM).
Change Settings
Select an optimal settings for super IO Device.
Serial Port 6 Configuration
Serial Port
Enable or Disable Serial Port (COM).
Change Settings
Select an optimal settings for super IO Device.
Hardware Monitor
Monitor hardware status
S5 RTC Wake Settings
Wake system From S5
Enable or disable System wake on alarm event. Select
FixedTime, System will wake on the hr::min::sec specified.
Select DynamicTime , System will wake on the current time
+ Increase minute(s).
CPU Configuration
CPU Configuration Parameters
Active Processor Cores
Number of cores to enable in each processor package.
Intel Virtualization Technology
When enabled, a VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
Intel(R) SpeedStep(tm)
Allows more than tow frequency ranges to be supported.
Turbo Mode
Enable / Disable Turbo Mode.
Battery Mode Power Limit
Enable / Disable battery mode power limit function.
Embedded Controller Configuration
Battery off Time
Number of seconds of cut off battery output after system
shutdowns.0~600 second(s) 0 means disable battery off
function.
I-39