User's Manual

Appendix J: All-In-One Computer User Manual
TM-5010-24P/24F User’s manual
28
External SATA
External SATA Support
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET
initialization sequence to the device.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or
Hard Disk Drive.
Topology
Identify the SATA Topology if it is Default or ISATA or Flex or
DirectConnect or M2
Device Sleep
mSATA for RTD3.
SATA DEVSLEP Idle Timeout config
Enable/Disable SATA DTIO Config
Serial-ATA Port 1
Enable / Disable Serial ATA Port 0.
Port 0
Enable or Disable SATA Port
HotPlug
Designates this port as hot Pluggable.
External SATA
External SATA Support
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET
initialization sequence to the device.
SATA Device Type
Identify the SATA port is connected to Solid State Drive or
Hard Disk Drive.
Topology
Identify the SATA Topology if it is Default or ISATA or Flex or
DirectConnect or M2
Device Sleep
mSATA for RTD3.
SATA DEVSLEP Idle Timeout config
Enable/Disable SATA DTIO Config
Serial-ATA Port 3
Enable / Disable Serial ATA Port 0.
Port 0
Enable or Disable SATA Port
I-41