User's Manual

Appendix J: All-In-One Computer User Manual
TM-5010-24P/24F User’s manual
30
Post Repost Support Enabled / Disabled.
Info Error Message
Info Error Message Support Enabled / Disabled.
Summary Screen
Summary Screen Support Enabled / Disabled.
USB Configuration
USB Support
USB Support Parameters.
Legacy USB Support
Enables Legacy USB support. AUTO option disables legacy
support if no USB devices are connected. DISABLE option will
keep USB devices available only for EFI applications
XHCI Hand-off
Enable / Disable XHCI Controller Legacy support.
USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
USB hardware delays and time-outs:
USB Transfer Time-out
The Time-out value for control, Bulk, and Interrupt transfers.
Device reset time-out
USB mass storage device Start Unit command time-out
Device power-up delay
Maximun time the device will take before it properly reports
itself to the Host Controller. 'Auto' uses default value: for a
Root port the delay is taken from Hub descriptor.
I-43