User's Manual

Appendix K: Tablet Computer User Guide
Removing the tablet from the keyboard base
To remove the tablet from the keyboard, pull the tablet away from the keyboard.
Using the keyboard wirelessly
IMPORTANT: During the initial startup, the software will prompt you to pair the keyboard with the tablet.
Refer to the Setup Instructions for information about the initial pairing.
After your keyboard is paired to the tablet, you can use the keyboard when it is not connected to the tablet.
Using the keyboard wirelessly expands your options for use.
NOTE: Connect the keyboard to the tablet when you are using these functions:
●
Computer Setup, or Basic Input/Output System (BIOS)
●
HP PC Hardware Diagnostics
●
Back up, restore, and recovery
NOTE: The automatic paring method is the preferred method to connect the keyboard wirelessly.
If the keyboard cannot communicate with the tablet, conrm the following:
●
The tablet Bluetooth setting is turned on. See Network connections on page 24.
●
The keyboard Bluetooth setting is turned on. The keyboard button light should be blue. See Keyboard
connectors, button, and status light on page 11.
If needed, set the Bluetooth pairing again.
Setting the Bluetooth pairing automatically
If the keyboard cannot communicate with the tablet, follow these steps to automatically set the Bluetooth
pairing:
NOTE: The tablet Bluetooth feature must be turned on.
Keyboard base components 17
J-27