User's Manual

Augmedics Ltd • xvision-Spine User Manual
Version 7
Figure 23: XVS Straight Clamp
2 3 41
1 Insert the allen screwdriver into the adjustment screw of the XVS Straight Clamp.
Caution: Take care to use the aperture located to the side of the clamp. Attempting to
tighten the central aperture, used for the patient marker, may damage the XVS
Straight Clamp.
2 Turn the allen screwdriver in a counter-clockwise direction to open the clamp jaws.
3 Making sure that the verification point is opposite the area to be scanned, attach the clamp
to the spinous processes in the operated area.
4 Use the allen screwdriver to close the XVS Straight Clamp tightly on the spinous processes.
6-14