Assembly Instructions

- 1 -

ASSEMBLY INSTRUCTIONS

Description

Dimension

Cube Size : 44”x44” x4” NW: 37.4 LBS

(Top) GW: 44 LBS

Cube Size : 27.1”x10.2”x8.8” NW: 19.8 LBS

(Pedestal) GW: 23.1 LBS

:42" ROUND TABLE WITH SINGLE PEDESTAL

: Ф42xH.30”

42" ROUND TABLE WITH SINGLE PEDESTAL

PAGE 1
ASSEMBLY INSTRUCTIONS Description Dimension Cube Size (Top) :42" ROUND TABLE WITH SINGLE PEDESTAL : Ф42xH.30” : 44”x44” x4” NW: 37.4 LBS GW: 44 LBS Cube Size : 27.1”x10.2”x8.8” (Pedestal) 42" ROUND TABLE WITH SINGLE PEDESTAL -1- NW: 19.8 LBS GW: 23.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
PAGE 3
STEP 1 Attach Legs (C) to column (B) by using Nuts (3), and Washers (2) and (1). Tighten with Wrench (4) as shown below. STEP 2 Use the Allen key (8) to loosen the bolts, and take off the plate underneath of the table top.
PAGE 4
STEP 3 Put the plates on top of the pedestals (B) with Bolts (7), washers 5) and (6) as shown below. Tighten with Allen key (8). STEP 4 Carefully put the pedestal block on the bottom side of the table top, attach the top to plate with bolts (from step 2) and tighten with the Allen key (8).