Assembly Instructions

Page 1 of 2

1 pce

8 pcs

4 pcs

8 pcs

4 pcs

48” SOFA TABLE WITH 2 DRAWERS

Legs

Thank you for purchasing this quality product.Be sure to check all packaging material

carefully for small parts that may have come loose inside the carton during shipment.

COMPONENT LIST: HARDWARE LIST:

Flat Washer

Wrench

Lock Washer

HexBolt

Pan Head Screw

PART NO

FIGURE

DESCRIPTION

QTY

Table Top

1 pce

Hardware Bag

1 pce

Fixed Shelf

PART NO

FIGURE

DESCRIPTION

This product will take 15-20

minutes to assemble.

Reminders

1.Use only the hardware supplied.

2.Once the product is assemble,level and tighten all the bolts.

3.Do not over-tighten bolts.

4.This item may require periodic tightening

NOTE:

1.Two or two people are needed for assembly

2 please keep all hardware parts out of the reach of children.

MADE IN MALAYSIA

PAGE 1
48” SOFA TABLE WITH 2 DRAWERS Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment.
PAGE 2
48” SOFA TABLE WITH 2 DRAWERS ASSEMBLY : STEP 1 1.1-Pull out the Drawer out and Turn the Table Top upside down on a protective surface such as carpet or other soft materialas shown in the Fig1. 1.2-Attach three legs randomly to the Table Top Using Flat Washer(3), Lock Washer(2), Hex Bolt(1) and Wrench(4). 1.3- Do not fully thighten bolts. 1.4-Insert the fixed shelf into the 3 legs as shown in the Fig1. Flat Washer Lock Washer Hex Bolt Wrench Fig.1 STEP 2 2.