Installation & Assembly

Key Wrench
(small)
1 pc.
Key Wrench
(large)
1 pc.
Bolt (large)
4 pcs.(+1 extra)
Bolt
4 pcs.(+1 extra)
Flat
Washer (large)
4 pcs.(+1 extra)
Spring
Washer (lage)
4 pcs.(+1 extra)
Spring Washer
4 pcs.(+1 extra)
Flat Washer
4 pcs.(+1 extra)
Nut (large)
4 pcs.(+1 extra)
Nut
4 pcs. (+1 extra)
Nut Cap (large)
4 pcs.(+1 extra)
Nut Cap
4 pcs. (+1 extra)
STEP 1
Attach Side Frames (C) and (D) to
Seat (B) with Bolts (large), Flat Washers (large),
Spring Washers (large) and Nuts (large),
tightening the bolts only half way.
Tighten all Bolts with Key Wrench.
Cover all Nuts with Nut Caps .(large)
STEP 2
Attach Back (A) to unit with Bolts,
Flat Washers, Spring Washers
and Nuts, tightening the bolts only half way.
Tighten all Bolts with Key Wrench, then cover all Nuts with Nut Caps.
A.
Back
1 pc.
B.
Seat
1 pc.
C.
Side Frame
1 pc.
D.
Side Frame
1 pc.
Part List
Hardware List
B
C
D
A
Flat Washer (large)
Spring Washer (large)
Nut (large)
Nut Cap (large)
Bolt
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt (large)
Arm Chair
Tools required for assembly : Phillips screwdriver
IMPORTANT
* Do not use power tools to assemble and do not over tighten the bolts.
* Do not tighten all the bolts until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to
tighten up the Nuts in the future.
IMPORTANT NOTE
This product is made of sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Over tightening can cause damage to the aluminum.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this product and
request that you carefully and strictly follow our assembly
instructions to ensure a completed product as it was designed.