User's Guide

Installation Guide18

Step 4:

Position the mounting plate.

Remove the backing from the 4 rubber bumpers and

place them on the back side of the mounting plate (the

side that does not show a number).

Rotate the mounting plate so the 4 rubber bumpers are

between the mounting plate and the door. Remove the

screws from the thumb-latch and use them to install the

mounting plate over the existing deadbolt tail piece.

Moderately tighten the screws until the mounting plate

is settled against the door. Over-tightening can deform

the mounting plate and interfere with the operation of

the lock.